مقاله Feasibility of Joining Al-20%Mg2Si In-Situ Composite By TIG Welding دارای 6 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است
فایل ورد مقاله Feasibility of Joining Al-20%Mg2Si In-Situ Composite By TIG Welding کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.
توجه : در صورت مشاهده بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی مقاله Feasibility of Joining Al-20%Mg2Si In-Situ Composite By TIG Welding،به هیچ وجه بهم ریختگی وجود ندارد
تعداد صفحات:6
چکیده:
The feasibility of joining an in situ Al-20%Mg2Si composite by TIG is investigated. Welding current was varied at five different values between 80 and 100 amp. Different areas were identified in the weldment region due to effect of welding specification. Mechanical properties of joints were evaluated by Tensile and microhardness tests. Joints welded with a welding current in the range of 80-85 amp displayed the highest degree of hardness. The fracture produced in the welded specimens was in the base metal MMC, indicating a strong interface between the base MMC and the weld. Therefore, the study finds that in situ Al-Mg2Si MMC can in fact be welded using TIG and Al-Si filler metal.
برای دریافت اینجا کلیک کنید
تعداد کل پیام ها : 0